ATI Professional Test Kit PO4

ATI Water Test Kit Phosphate Professional test kit, laboratory-controlled, to measure the phosphate value of seawater in phosphate

High yield, sufficient for at least 100 applications.

Easy handling due to clear color change

High resolution (precision): 0.01 mg/l.

Range: 0.01 - 0.3 mg/l.

Incl. multistandard

Measure the phosphate value at the laboratory level

Our phosphate test is characterized by particularly high sensitivity and precision. Extra-long test tubes result in a significantly higher layer thickness. This leads to better color recognition and thus a particularly low detection limit. At the same time, the resolution in the low concentration range, which is interesting for aquaristics, increases significantly. Additionally, the included PO4 standard allows the verification of the functionality and durability of the phosphate test (for this, add 0.1 ml of PO4 standard to 35 ml of ultrapure water (<0 μS) to prepare a reference solution containing 0.1 mg/l phosphate.)

Controlled safety

The production of our reef care products is subject to strict monitoring by our own laboratory. Quality assurance helps us select the purest raw materials and leads to finished products of the best quality. The accuracy of the phosphate test kit has also been adjusted and tested in our laboratory.

Instructions for the PO4 test kit
 

Open PO4 test kit

Color chart 

5 ml syringe 
(To remove 5 ml from the sample volume of the completely filled titration tubes.)

1 ml standard 
(0.1 ml of PO4 standard + 35 ml of ultrapure water (<0 µS) = reference solution containing 0.1 mg/l of PO4)

Titration tube 1 
(for example, for the blank)

Titration tube 22 
(for example, for the sample. Using a spoon, add PO4 1 reagent to the sample.)

PO4 2 reagent 
(Caution: corrosive!)

PO4 1 reagent 
(Powder, not harmful.)

Comparator 
(Place the two titration tubes in the comparator, then place the comparator on the color chart.)