The BIO-REACT V2 1000 is a fluidized bed reactor designed for the use of granular media aimed at eliminating nitrates and phosphates. It is suitable for aquariums up to 1000 L when used with approximately 1000 ml of specific granules.
This reactor ensures a uniform circulation of water through the media to optimize its efficiency and maintain stable water quality in the aquarium.
| Feature | Data |
|---|---|
| Recommended Aquarium Volume | Up to 1000 L |
| Maximum Media Capacity | Approximately 1500 ml depending on the media used |
| Maximum Flow Rate | Approximately 2000 L/h |
| Dimensions | Ø 140 mm x 550 mm (height) |
| Inlet / Outlet | 16 mm |
The BIO-REACT V2 1000 can be installed internally in a sump or directly in the aquarium. It can also be used externally as a standalone or hang-on reactor, depending on the chosen configuration.
The reactor must be connected to a pump or an external filter, not provided. The flow rate can be adjusted to suit the type of media used.
The reactor is suitable for freshwater and marine aquariums. It is particularly suited for the use of granules intended for the removal of nitrates and phosphates, but can also accommodate many other types of filter media.
The BIO-REACT V2 1000 comes with a set of fittings for easy and quick installation. Additional fittings may be needed depending on the type of installation.
Fluidized bed reactor intended for the use of granular media to optimize biological and chemical filtration in aquariums.