Turbelle® masterstream 6560

Turbelle® stream 6560 - TUNZE

Technical Specifications:

- 12V technology for aquariums > 10,000 liters.

- Flow rate: 30,000 to approximately 60,000 l/h

- Circulation speed: 0.8 - 1.5 m/s

- Energy consumption: max. 110-140 W

- Power adapter: 100-240V / 50-60Hz / 12-14VDC

- Cable length: 10 m

- Dimensions (L x W x H): 340 x 165 x 227 mm

- Output: ø125 mm

- Mounting on tube ø32 mm

- Delivered with Wavecontroller 7092

TUNZE® Turbelle® masterstream ... concealed water circulation

Turbelle® masterstream pumps are intended for the high-performance centrifugal pump market segment, primarily designed for modern zoos, research institutes, health clinics, and aquaculture facilities. A model has also been developed for large aquarium enthusiasts needing strong and extensive water circulation for their reef tanks. Turbelle® masterstream was developed to achieve maximum performance with economical energy consumption. Thanks to the use of the safe low-voltage TUNZE® PM electronic motor, the pumps do not operate noisily, even at their highest performance mode. They also consume significantly less energy than conventional pumps when doing the same work.

Variable Capacity

The Turbelle® masterstream pumps are electronically speed-regulated using the Turbelle® Controller / Multicontroller / SmartController 7000. They are ideal for forced water circulation, simulating wave impacts, and simulating ebb and flow.

12V Version for Pools

The model 6560 with 12V technology and 60,000 l/h was specially developed for pools and large aquariums.
100% corrosion-resistant
All parts of our pumps are made from technical plastics ASA and POM and enriched with auxiliary plastic PA6.6. PU-coated cables, titanium alloy motor shaft, motor, and electronics flooded with PU material.

No External Control

The control device of the pump is integrated into the motor to ensure its operation at the highest level of efficiency with optimal water cooling, maintenance-free. All Turbelle® MasterStream pumps require an external power supply or a safety connector with the correct DC current (battery, solar panel, etc.)

Reliable in Case of Power Outage

The Masterstream Turbelle® pumps can be used with the Safety Connector 6515.500 on a DC power supply (battery, solar battery) with a capacity of 10 to 24 V. The safety connector allows for normal pump operation using the TUNZE® power supply. In the event of a power outage, it automatically switches to the battery or another DC power source.

Energy Savings

A simple calculation of the parameters of the Turbelle® masterstream 6580 (80 m³/h - 420 W) proves that because of the optimal water movement in terms of water energy consumption, costs can be enormously saved:
Tank volume: 60 m³, circulation selected via centrifugal pump (32 m³/h - 2200 W). This means that for 8,760 hours of operation all year round and a price of 0.28 EUR per kilowatt, you can save 4,366 EUR per year.