Dual Temperature Controller D-D

The Dual Temperature Controller from DD is a dual digital temperature controller. It is designed to allow precise temperature control in an aquarium and features 2 modes that allow for both heating and cooling control.

Double mains power socket - one power socket for heating control and the other for fan/cooler control.

Features

• Plug and play - no wiring required
• Heating/cooling can be set within 0.3 deg C of the target temperature, for example, a control range of 24.7 to 25.3 deg C (with a set temperature of 25 deg C)
• Audible and visual alarm function, e.g., alarm sounds if the temperature is below 24 deg C or above 26 deg C (with the alarm set at 1 deg C)
• 2m long plastic-coated temperature sensor with suction cup mount
• Heating control (resistive load, such as a radiator) max 1600W
• Cooling control (inductive load, such as a cooler) max 600W
• Display: Blue backlit LCD - always on
• Memory power-off function
• Makes an ideal control platform for our Schego Titanium aquarium heater

Size:

• Display panel size: 95 mm x 50 mm x 15 mm
• Control socket size: 160 mm x 70 mm x 45 mm 

Technical specifications:

• Temperature measurement range: -40 to 99 degrees C
• Temperature differential setting range 0.3 – 16.0 deg C
• Alarm function range: 0.5 to 5 degrees C from the set temperature
• Resolution: 0.1 degree C
• Accuracy: ±1 deg C (-30 - 50 deg C)
• Power supply: 220VAC±10%, 50/60Hz         
• Operating humidity range: 20% to 85%
• Power consumption: ≤3W
• Operating temperature range: -10°C to 60°C