JBL PROCLEAN AQUA IN-OUT Water Jet Pump

JBL ProClean Aqua In-Out – Water jet pump for water change

The JBL ProClean Aqua In-Out water jet pump is designed to siphon and fill aquarium water via a direct connection to the faucet. It operates by creating a vacuum generated by the running water from the faucet.

Operation

Once screwed onto the water faucet, the pump creates a vacuum that allows water to be siphoned from the aquarium through a hose. By toggling the integrated lever, you can switch from siphoning mode to filling mode for the aquarium.

This system allows you to change the water without using buckets.

Installation

The pump is screwed directly onto the water faucet, then the hose is connected to the designated outlet. You simply need to open the faucet and select the lever position according to the desired operation.

The pump is normally part of the JBL ProClean Aqua In-Out kit, but it can also be purchased separately as a replacement or additional part.

Compatibility

The pump is equipped with a 3/4'' threaded connector. It should be attached to the faucet thread, usually M28, M22, or M24, using a suitable adapter not provided.

The movable hose connector is compatible with hoses of 12/16 mm diameter.

Technical Data

Package Contents

1 complete JBL ProClean Aqua In-Out siphoning pump including:
3/4'' threaded connector,
integrated stopcock,
sealing gasket,
movable hose connector 12/16 mm with clamping nut.