BEA P ADSORB 250ml

Bea P Adsorb 250ml - Filter Media for Aquarium

Bea P Adsorb is an innovative and regenerable filter media designed for aquariums. Composed of ceramized iron hydroxide, it adsorbs and permanently retains phosphates and silicates without releasing them.

P

Structure and Adsorption Efficiency

Thanks to its highly microporous internal structure, it offers a large contact surface, which enhances its efficiency in adsorbing bioavailable phosphates in your aquarium. This third-generation biomedia ensures effective and rapid water purification.

P

Technical Characteristics of the Aquarium Media

Granule size: approximately 0.3‑0.4 cm (3–4 mm).
Lightweight, with very low dust release.

P

Treatment Capacity and Recommended Dosage

500 ml of Bea P Adsorb is sufficient to treat up to 1000 liters of aquarium water. For an average 200-liter well-populated aquarium, use 100–200 ml gradually.

Introduce 25% of the initial dose, then increase over 1 to 2 weeks according to the reaction of the aquarium ecosystem.

P

Usage and Regeneration of the Filter Media

Bea P Adsorb can be used in individual bags, in a fluidized bed filter, or in specific reactors. Replace the bag after 60 days of use.

P

Regeneration Procedure (up to 3–4 cycles)

Wear gloves and protect your eyes!

1. Wash with 3% peroxide (soak for 6‑12 hours), rinse.
2. Soak in a citric acid solution (6‑12 hours), rinse.
3. Finish with a baking soda wash (6‑12 hours), rinse thoroughly.

P

Benefits for Your Aquarium

This filter media provides:

• Permanent retention of phosphates and silicates in the aquarium;

• Rapid improvement in water quality and clarity;

• Reduction of the workload on existing filtration systems.

• P

• Usage Precautions

• Product not intended for consumption. Keep out of reach of children. Do not overdose: excess can cause a rapid imbalance in the aquarium.

• Keep this biomedia closed in a cool, dry place.