BEA N ADSORB 500ml

Bea N Adsorb 500ml - Filter Media for Aquarium

Bea N Adsorb 500ml is an innovative and regenerable filter media designed for aquariums. It consists of a cross-linked internal structure with microporosity, providing a large adsorption surface for ammonia and impurities.

Contained in a bag suitable for use in a skimmer or reactor.

Aquarium Capacity and Compatibility

500 ml of BEA N Adsorb effectively treats an aquarium up to 1000 liters. For a moderately populated 200-liter aquarium, a dose of 100-200 ml is recommended. Gradually increase the dose to avoid an ecological shock.

Instructions for Aquarium Use

Insert BEA N Adsorb into a filter bag, a fluidized bed filter, or a reactor. Replace the bag after a maximum of 60 days. Rinse the product with clear water before use.

Reloading and Regeneration

You can regenerate BEA N Adsorb for up to 3-4 cycles:

1. Peroxide Wash at 3%: Soak for 6-12 hours (e.g., 200 ml peroxide + 2 liters of osmosis water + 500 ml of product). Then rinse thoroughly.

2. Citric Acid Wash: 6-12 hours (10 ml acid in 2 liters of osmosis water + 500 ml of product). Rinse.

3. Bicarbonate Wash: 6-12 hours (10 ml bicarbonate in 2 liters of water + 500 ml product). Rinse.

Benefits for Aquarium Filtration

– High adsorption capacity for ammonia and nitrites, with **low dust release**.
– Promotes chemical stability of the water combined with a good skimmer.
– Effectively reduces nitrogenous and inorganic contaminants.

Technical Information

Granulometry: 5–6 mm
Treatment Capacity: 500 ml → 1000 liters aquarium
Recommended Dosage: 100-200 ml for a 200-liter aquarium
Regeneration: up to 4 cycles (peroxide, citric acid, bicarbonate).