COL MARINE SILICATE EX 500 ML

(5/5) out of 2 total ratings
Read the reviews

Colombo Marine Silicate Ex 500 ml – Removal of Silicates and Brown Algae

Colombo Marine Silicate Ex is a highly effective filter media designed to quickly eliminate silicates present in seawater. High concentrations of silicates are the main cause of the appearance of brown algae, also known as diatoms. By removing their nutrient source, Silicate Ex prevents their development and promotes their disappearance.

Targeted Action Against Diatoms

A silicate concentration of up to 0.50 mg/l can be tolerated in a marine aquarium. However, to sustainably eradicate diatoms, this level must be lowered to 0. Colombo Marine Silicate Ex acts quickly to reach this level and restore a healthy reef environment.

Filter Media with Porous Structure

Silicate Ex is composed of porous spheres offering maximum water flow and high adsorption capacity. This structure optimizes contact with the water and allows for quick and effective removal of silicates, even in heavily loaded aquariums.

Dosage and Usage Instructions

Recommended dosage: 100 ml for 200 liters of seawater.

Rinse Silicate Ex thoroughly with cold water to remove any dust traces. Then place the media in a fine filter bag, and install it in an area with good water flow, such as the sump or filtration compartment.

When the desired silicate level is reached, remove the Silicate Ex. The media can be stored and reused later.

Interaction with Phosphates

Silicate Ex also binds phosphates present in the water. For optimal efficiency, it is recommended to first reduce phosphates using Colombo Phosphate Ex. Avoid adding phosphates during the use of Silicate Ex to not decrease its effectiveness.

Technical Specifications

Type: Anti-silicate filter media

Action: Removal of silicates and reduction of brown algae (diatoms)

Dosage: 100 ml for 200 liters of seawater

Capacity: 500 ml

Compatibility: Marine aquarium

Structure: Porous spheres with high adsorption capacity

Brand: Colombo