You might also like
The Premium Sea Salt from Royal Nature is a natural sea salt intended for the preparation of seawater for marine aquariums. Mixing recommendations allow for the creation of saltwater that meets the specified parameters before being introduced into the aquarium.
Packaging: 10 kg bucket.
Use: preparation of saltwater for marine aquariums.
Target density indicated: between 1.024 and 33.9 PPT.
Recommended stirring and aeration: 2 hours.
To achieve the desired density, between 1.024 and 33.9 PPT, it is recommended to mix 1 kg of ROYAL NATURE salt with 30 L of osmosis water.
It is recommended to use a separate, clean container with osmosis water, while adding the salt with regular stirring and aeration for 2 hours.
The mixed saltwater is ready to use when the salt is completely dissolved. The best results are obtained at a temperature of 23 c.
Check the density and adjust if necessary by adding salt or water before introducing it into the aquarium.
A partial water change each week, replacing 10 to 12% of the total volume with saltwater prepared with ROYAL NATURE salt, contributes to maintaining corals and fish.
The volume of saltwater that can be prepared depends on the specific amount required for the final solution. ROYAL NATURE salt is intended for regular water changes.
| Reference | Indicated Value |
|---|---|
| Reference Dosage | 1 kg of salt for 30 L of osmosis water |
| Target Density / Salinity Indicated | Between 1.024 and 33.9 PPT |
| Recommended Stirring and Aeration | 2 hours |
| Recommended Temperature | 23 c |
| Weekly Water Change | 10 to 12% |
Before adding to the aquarium, always check the density and adjust to reach the desired parameters.