- Out-of-Stock
You might also like
The Premium Sea Salt Adv Pro by Royal Nature is a salt intended for the preparation of seawater for reef aquariums. The mixing and implementation recommendations below allow you to achieve the desired density before adding it to the aquarium.
Packaging: 20 kg carton.
Use: preparation of saltwater for marine aquariums.
Target density indicated: between 1.024 and 33.9 PPT.
Recommended mixing and aeration time: 2 hours.
To achieve the desired density, between 1.024 and 33.9 PPT, it is recommended to mix 1 kg of ROYAL NATURE salt with 30 L of osmosis water.
It is advised to use a separate and clean container with osmosis water, while adding the salt with regular mixing and aeration for 2 hours.
The mixed saltwater is ready to be used when the salt is completely dissolved. The best results are achieved at a temperature of 23°C. Check the density and add salt or water to reach the appropriate levels before adding it to the aquarium.
A partial water change every week by replacing 10 to 12% of the total volume with saltwater prepared with ROYAL NATURE's advanced formula salt helps maintain corals and fish.
The volume of saltwater that can be mixed with a single carton or bucket of ROYAL NATURE salt depends on the specific amount required for the final solution. Use ROYAL NATURE salt for regular water changes.
| Reference | Indicated Value |
|---|---|
| Reference Dosage | 1 kg of salt for 30 L of osmosis water |
| Indicated Target Density/Salinity | Between 1.024 and 33.9 PPT |
| Recommended Mixing and Aeration | 2 hours |
| Recommended Temperature | 23°C |
| Weekly Water Change | 10 to 12% |
Before adding to the aquarium, check the density and adjust with salt or water to reach the appropriate levels.